EN 10216-2 P235GH Umshini Weshubhu Lensimbi Ongenamthungo
Izinjongo Zokucindezela – Ukusebenza Ezingeni Lokushisa Eliphezulu – Ikhwalithi ye-TC1 & TC2
OD 6~204mm | WT 1~18mm | Idonswe Ebandayo
Uhlolojikelele Lomkhiqizo
Okwethu I-EN 10216-2 P235GH amashubhu ensimbi angena-alloy angenamthungo aklanyelwe ngokukhethekile izinhloso zokucindezela emazingeni okushisa aphakeme. Yakhiwe ngenqubo yokudonsa ebandayo endaweni yethu yase-Wuxi, la mashubhu afanelekele amabhoyela, ama-superheater, ama-heat exchanger, kanye nezinhlelo zamapayipi okucindezela asebenza emazingeni okushisa afinyelela ku- 400°C.
Amazinga Ekhwalithi:
-
I-TC1 – Izinga lekhwalithi elijwayelekile lezicelo zokucindezela ezijwayelekile
-
I-TC2 – Izinga lekhwalithi eliphezulu eline Ukuhlolwa komthelela kwe-Charpy (27J ubuncane ku-0°C)
Imininingwane Ebalulekile:
-
Izinga: EN 10216-2:2023
-
Okubalulekile: Insimbi engeyona i-alloy yekhabhoni (P235GH)
-
Inombolo yezinto: 1.0345
-
Ububanzi Bangaphandle: 6mm – 204mm (Isitokwe esijwayelekile: 19mm – 89mm)
-
Ubukhulu Bodonga: 1mm – 18mm
-
Ubude: 4m – 12m (Ubude obungokwezifiso buyatholakala)
-
Inqubo yokukhiqiza: Okudonswe Kubandayo (Okungenamthungo)
-
Ukwelashwa Kokushisa: Okujwayelwe (≥845°C)
-
Ukuqedwa Kwebuso: Mnyama / Ungenalutho / Uthwele uwoyela
✅ EN 10216-2 iqinisekisiwe – Ithobela i-PED 2014/68/EU – Ukuphawulwa kwe-CE kuyatholakala
✅ Elingenamthungo elidonswe kubanda – Akukho mthungo wokushisela – ukuqinisekiswa kwengcindezi kuqinisekisiwe
✅ Idizayini yezinga lokushisa eliphakeme – Idatha yamandla okukhasa (creep) itholakala kuze kufike ku-400°C
✅ Ikhwalithi ye-TC2 – Ihlolwe ngomthelela we-Charpy ku-0°C (27J ubuncane)
✅ Ihlolwe nge-100% NDT kanye ne-hydrostatic – Ukuqinisekiswa kobuqotho
✅ I-EN 10204 Uhlobo 3.1 MTC inikezwe ngenombolo yokushisa
✅ Iqondane nefekthri – Amanani ancintisanayo nokulethwa okusheshayo
Ukwakheka Kwamakhemikhali – P235GH
| Isici | C | I-Si | I-Mn | P max | I-S max | I-Al |
|---|---|---|---|---|---|---|
| Imfuneko | ≤0.16 | ≤0.35 | 0.60-1.20 | 0.025 | 0.015 | ≥0.020 |
💡 I-phosphorus ephansi ne-sulfur iqinisekisa ukuqina okuhle nokukwazi ukushisela emsebenzini wemishini yokucindezela. I-Aluminiyamu (≥0.020%) ihlinzeka ngokucwengwa kwezinhlayiya ukuze kuthuthukiswe izakhiwo.
Izici zemishini
| Impahla | Inani | Ukubaluleka |
|---|---|---|
| Amandla Okuqina | 360 – 500 MPa | Kulungele imishini yokucindezela |
| Amandla Okuvumela | ≥235 MPa | Amandla amahle okucindezela okujwayelekile |
| Ukunwebeka | ≥25% | Ukunwebeka okuhle kakhulu kokubumba |
| Umthelela we-Charpy (TC2) | 27J min ku-0°C | Ukuqina okuqinisekisiwe ekushiseni okuphansi |
I-TC1 vs I-TC2 – Amazinga Ekhwalithi
| Isici | I-TC1 | TC2 |
|---|---|---|
| Ukuhlolwa Komthelela kwe-Charpy | Akudingekile | Kuyadingeka (27J ku-0°C) |
| Izidingo ze-NDT | Okujwayelekile | Ukwamukelwa okuqinile |
| Ukusetshenziswa okuvamile | Imishini ejwayelekile yokucindezela | Izicelo ezibucayi, ukuqala ekushiseni okuphansi |
| Izindleko | $ | $$ |
💡 Khetha i-TC2 lapho kudingeka ukuqina komthelela – ngokuvamile kucaciswa izimo zokuqala ezingeni lokushisa eliphansi noma imishini yokucindezela ebucayi.
Inqubo Yokukhiqiza – Ukudonsa Okubandayo
Inqubo Yokudonsa Okubandayo Yamashubhu Okucindezela:
-
Amashubhu agingqwe ashisayo (Hot rolled tubes) ayahlanzwa ukuze kususwe isikali
-
Ukudonsa okubandayo (Cold drawing) linciphisa ngokunembile ububanzi – likhulisa amandla
-
Ukushiswa (ukujwayela) – iqinisekisa ukwakheka kwezinhlayiya ezinhle, ibuyisela ukuthamba
-
Ukuqondisa – iqinisekisa ukuqondakala kokufakwa
-
Ukusika okunembile – ubude obunembile bokukhetha kwekhasimende
-
Ukuhlolwa okungu-100% NDT kanye nokuhlolwa kwe-hydrostatic – iqinisekisa ubuqotho
-
Ukuhlolwa komthelela kwe-Charpy (TC2) – iqinisekisa ukuqina ekushiseni okuphansi
Amandla Okuvumela Ezingeni Lokushisa Eliphakeme (Rp0.2 MPa min)
| Temp (°C) | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 |
|---|---|---|---|---|---|---|---|---|
| P235GH | 190 | 180 | 170 | 155 | 145 | 135 | 130 | 120 |
💡 I-P235GH igcina amandla amahle kuze kufike ku-400°C – ngaphezu kwaleli zinga lokushisa, sebenzisa i-16Mo3 noma i-13CrMo4-5 alloy grades.
Izicelo Eziyinhloko
| Imboni | Ukusetshenziswa | Ikhwalithi Enconyiweyo |
|---|---|---|
| Ukukhiqiza Amandla | Amapayipi e-boiler, umusi wokucindezela ophansi | I-TC1, i-TC2 |
| Imithwalo Yokucindezela | Izigubhu, ama-accumulator, ama-header | TC1, TC2 |
| Amabhoyila Ezimboni | Ama-steam generator, ama-economizer | TC1 |
| Ama-Heat Exchangers | Ama-shell nama-tube assemblies | I-TC1, I-TC2 |
| I-Petrochemical | Ukusetshenziswa kwamapayipi okushisa okuphezulu | TC2 |
💡 I-TC2 inconywa ukuthi isetshenziselwe izinhlelo ezibalulekile okudinga ukuqina komthelela ezimweni zokuqala ezishisayo eziphansi.
I-DIN 17175 Cross-Reference
| I-EN 10216-2 | DIN 17175 (Ihoxisiwe) |
|---|---|
| P235GH | St35.8 |
| I-P265GH | St45.8 |
| I-16Mo3 | 15Mo3 |
| 13CrMo4-5 | 13CrMo44 |
💡 I-P235GH iyisikhundla esiqondile se-St35.8 – kumaphrojekthi amadala, sihlinzeka ngazo zombili izindinganiso.
Kungani Ukhetha Amapayipi Ethu E-EN 10216-2 P235GH?
| Inzuzo | Incazelo |
|---|---|
| Izinga elihambisanayo le-PED | Ukuphawulwa kwe-CE kuyatholakala – ukuthobela imithetho ye-EU |
| Ikhwalithi ye-TC1 noma ye-TC2 | Khetha izinga lokuhlolwa komthelela ngokusekelwe kusicelo |
| Ukudonsa okubandayo okunembile | Ukulinganisa okuqinile – kulungele imishini yokucindezela |
| Ukuklanywa kwezinga lokushisa eliphakeme | Idatha yamandla okukhasa (creep) iyatholakala kuze kufike ku-400°C |
| Ihlolwe 100% | I-NDT + i-hydrostatic – ihlangabezana nezidingo ze-PED |
| Ukulandeleka okugcwele | I-EN 10204 3.1 MTC ngenombolo yokushisa |
| Ububanzi obubanzi bosayizi | I-OD 6-204mm – ukuthola konke endaweni eyodwa |
Xhumana nathi ukuze uthole isilinganiso
📧 I-imeyili: yjhtrade@gmail.com
📞 I-WhatsApp: +86 15106174543
🌐 Iwebhusayithi: www.hzhmetals.com / www.wuxihengzhihui.com
Umuntu oxhumana naye: U-Alice Yuan
Phendula ngaphakathi kwamahora angu-24.
Amathegi: EN 10216-2 P235GH Ishubhu Lokucindezela Elingenamthungo TC1 TC2 Ipayipi Lebhoyila I-PED Ukuphawula Kwe-CE Izinga Lokushisa Eliphakeme
